System 1 - Solid Grade
Panels manufactured from 13mm solid grade laminate.
Toilet / Shower Cubicles
Fittings manufactured from stainless steel, satin finish. Overall cubicle height: 1960mm (1810mm high panel + 150mm high adjustable foot). Cubicle width and depth to suit requirements.
Full Height Duct Panelling for WC, WHB, Urinal, or Blank
Floor to ceiling duct sets, each set comprising 3 (or 4 in cases of higher ceilings) front panels with bevelled edges. Sets supplied with panels ready-clipped to ply and softwood frame, with laminated vertical shadow gaps up to 40mm wide, and laminated ply plinths and head rails. CNC machining of panels for sanitary ware available if required.
Low Level Duct Panelling for WC, WHB, Urinal or Blank
Low level duct sets, each set comprising of 2 front panels and a removable lid. Height and depth are to suit requirements. Panels with bevelled edges and a lid with a radius front edge. Sets supplied with panels ready-clipped to ply and softwood frame, with laminated vertical shadow gaps up to 40mm wide, and laminated ply plinths. CNC machining of panels for sanitary ware available if required.
Vanity Units
850mm high and up to 600mm deep for inset basins and up to 350mm deep for semi-recessed basins. Dimensions may be varied to suit requirements. Top with a radius front edge and solid grade laminate down stand. Base supplied with front lift-off access panels mounted on softwood framework. Exposed edges are bevelled as appropriate. Plinths manufactured from laminated 18mm ply. Units are available with pre-machined basin cut-outs if required.
Contact details:
Telephone: 01291 624 344
Fax: 01291 627 414
sales@cbpanels.co.uk
C&B Laminated Panels Ltd
Buttington Works
Beachley
NP16 7FE
Telephone: 01291 624 344
sales@cbpanels.co.uk