
System 3 - MFC
Panels manufactured from 19mm Moisture Resistant Melamine Faced Chipboard edged in 3mm PVC.
Toilet Cubicles
Fittings in stainless steel, satin finish. Overall cubicle height: 1960mm (1810mm high panel + 150mm high adjustable foot). Cubicle width and depth to suit requirements.
Full Height Duct Panelling for WC, WHB, Urinal, or Blank
Floor to ceiling duct sets, each set comprising 3 (or 4 in cases of higher ceilings) front panels edged in 3mm PVC. Sets supplied with panels ready-clipped to ply and softwood frame, with laminated vertical shadow gaps up to 40mm wide, and laminated ply plinths and head rails. CNC machining of panels for sanitary ware available if required.
Low Level Duct Panelling for WC, WHB, Urinal or Blank
Low level duct sets, each set comprising 2 front panels and removable lid edged in 3mm PVC. Heights to suit requirements. Sets supplied with panels ready-clipped to ply and softwood frame, with laminated vertical shadow gaps up to 40mm wide, and laminated ply plinths. CNC machining of panels for sanitary ware available if required.
Vanity Units – for Inset Basins
850mm high and up to 600mm deep for inset basins and up to 350mm deep for semi-recessed basins. Dimensions may be varied to suit requirements. Top manufactured from 18mm MR chip faced in laminate backed in white liner, with integral post formed 200mm down stand. Base and front lift-off access panels manufactured from same or 19mm MR MFC edged in 3mm PVC, with laminated 18mm ply plinths. Units available with pre-machined basin cut-outs if required.
Contact details:
Telephone: 01291 624 344
Fax: 01291 627 414
sales@cbpanels.co.uk
C&B Laminated Panels Ltd
Buttington Works
Beachley
NP16 7FE
Telephone: 01291 624 344
sales@cbpanels.co.uk